民用飞机技术出版物规范应用

技术出版物作为民用飞机产品的重要组成部分,用于指导运营人正确地操作和维护飞机.为了满足相关适航规章的要求和用户对于交互式电子技术手册日益增长的需求,实现手册全寿命周期管理,飞机制造商应在保证手册完整、正确、准确的基础上,进一步实现手册的标准化、规范化和结构化.本文对国际主流技术出版物规范的特点、规范的确定、应用方法和风险等进行了介绍和阐述.     

Data fusion algorithm based on state and attribute parameter

Ａｑｕｅｓｔｉｏｎｔｈａｔｈａｓｂｅｅｎｃｏｎｃｅｒｎｅｄｆｏｒｍａｎｙｙｅａｒｓｉｎｔｈｅｍｕｌｔｉｔａｒｇｅｔｔｒａｃｋｉｎｇｆｉｅｌｄｉｓｈｏｗｔｏｒｅｄｕｃｅｔｈｅｃｏｍｐｕｔａｔｉｏｎａｌｃｏｍｐｌｅｘｉｔｙｏｆｄａｔａａｓｓｏｃｉａｔｉｏ...     

Evolution of the periodicities in 2S 0114+650

We have analysed 9 years of data from the All Sky Monitor on the Rossi X-ray Timing Explorer for 2S 0114+650 to study the evolution of its spin, binary, and super-orbital periods. The spin history of the neutron star in this system exhibits torque reversals lasting 1 year. The newly discovered super-orbital period has remained stable over the 9-year span, making 2S 0114+650 the fourth known system to exhibit stable super-orbital modulation. We compare its super-orbital period evolution with those of the other three such systems.     

Friction moment analysis of space gyroscope bearing with ribbon cage under ultra-low oscillatory motion

This paper presents the model of calculating the total friction moment of space gyroscope ball bearings which usually work under ultra-low oscillatory motion and are very sensitive to the friction moment. The aim is to know the proportion of the friction moment caused by each frictional source in the bearing＇s total friction moment, which is helpful to optimize the bearing design to deduce the friction moment. In the model, the cage dynamic equations considering six degree-of-freedom and the balls dynamic equations considering two degree-of-freedom were solved.The good trends with different loads between the measured friction moments and computational results prove that the model under constant rate was validated. The computational results show that when the speed was set at 5 r/min, the bearing＇s maximum total friction moment when oscillation occurred was obviously larger than that occurred at a constant rate. At the onset of each oscillatory motion, the proportion of the friction moment caused by cage in the bearing＇s total friction moment was very high, and it increased with the increasing speed. The analyses of different cage thicknesses and different clearances between cage pocket and ball show that smaller thickness and clearance were preferred.     

曲线物面边界条件在DGM中的应用研究

基于二维非结构网格,采用高精度间断Galerkin有限元方法数值求解定常Euler方程。为了有效克服传统的反射物面边界条件在物面处易于生成伪熵降低计算精度的缺陷,提出一种曲线物面边界条件,从而实现对物理模型而不是数值模型进行数值模拟。对经典圆柱亚音速无粘绕流进行数值模拟,结果表明:采用曲线物面边界条件之后,流场解的精度得到很好的提高;此外,在非常稀疏的网格上,通过提高基函数的阶次仍可以得到高精度的数值解。     

S形蒙皮零件成形工艺

通过运用S3F软件对S形蒙皮拉形过程进行模拟仿真分析,评估S蒙皮拉形工艺性;预测拉形过程中将产生的缺陷;制定合理工艺方案;优化零件设计和模具结构;实现了该蒙皮零件在数控蒙皮拉伸机上的拉形。     

两邻边铰支两邻边固支von-Karman矩形板的研究

本文运用双重Ｆｏｕｒｉｅｒ级数分析了受横向均布载荷作用下两邻边铰支两邻边固支矩形板的非线性弯曲问题。利用该级数正交性，可以把非线性偏微分控制方程化为含级数系数的非线性代数方程组并通过迭代解出所有系数。最后给出了位移和应力的计算结果。     

三维可压缩 Navier-Stokes 方程的间断Galerkin 有限元方法研究

拓展了二维间断 Galerkin(DG)有限元方法研究，将该数值方法用于三维可压缩欧拉方程和 Navier-Stokes方程的求解。基于六面体网格单元，采用插值方法将物面的四边形面网格单元构造为弯曲面网格单元，更好地表述了真实物面特征；物面边界相邻体网格单元相应构造为高阶体网格单元，其余体网格单元采用八节点六面体单元，以较小的计算代价使网格满足 DG 方法计算需求。通过对三维带 bump 管道内流、圆球绕流以及旋转流线体绕流进行的数值求解，验证了边界弯曲方法的可行性及 DG 方法的高精度特性。此外，由于采用了隐式计算方法，仅需较少的时间步就能迭代收敛。     

固体火箭发动机燃烧室三维流动数值计算

采用ｋε双方程湍流模型，以ＳＩＭＰＬＥ 计算程式求解翼柱型装药固体火箭发动机燃烧室内三维非定常不可压流ＮＳ 方程．在建立翼柱型装药简化模型的基础上采用边界标志法来表达燃面推移，采用从二维到三维的初场给定方法结合多重网格法求出了多个时间步的非稳态流场结构．计算结果表明燃烧室内旋涡运动呈现一定的空间与时间分布，周向加质导致燃气通道横断面上轴向速度分布的极不均衡．     

一类非线性椭圆型方程非平凡解和分歧点的存在性

本文给出了所谓集中到列紧原理的另一形式，并利用它讨论了一类非线性椭圆型方程广义银和分歧点的顾在性。